unfinished wood jewelry boxes wholesale Even when wlam is displayed, there is no valid IP address

unfinished wood jewelry boxes wholesale

1 thought on “unfinished wood jewelry boxes wholesale Even when wlam is displayed, there is no valid IP address”

  1. diamond 13 pendant hammered backround wholesale biker jewelry 1. The notebook has a wireless network card and supports virtual WIFI
    2, press Win R key, and enter the CMD Enter after running (that is, the frame of the search program and file)
    3, enter the netsh wlan set mode = allow SSID = MyWifi KEY = 12345678 This setting wireless name and link password, etc. There are prompts to set up successfully and then turn off at
    4, also follow the above steps CMD to enter Netsh Wlan Start to start the wifi start -loading network and then turn off
    5. At this time, find the network and shared center in the control panel. WiFi hotspot) Right -click his point attribute and find the Internet TCP/IP protocol 4 Double -click to enter the settings IP address 192.168.0.1 mask 255.255.255.0 Close OK
    7. Find the local connection (the one on the Internet network online is also the network network network is the Internet network. ) Similarly, right-click attribute-point sharing tab-allow other network users to pass through. Essence Essence前面打钩------家庭网络选中无线网络2(就是选wifi热点刚刚设置那个),确定。
    8, OK, so that the basic computer is set to be OK, then the mobile phone setting
    9, connecting SSID MyWIFI to the input password 12345678, connect to
    10, all of them
    11, if it is a broadband, if it is a broadband The connection is not the router to the Internet to replace the local connection operation to the broadband connection (dial -up) to set the problem that the problem that is mainly talked about after the link is generally the dormant state of the mobile phone WLAN setting. The mode of mode is changed to non -electricity -saving status (excluding this reason because the wife's notebook test and stability can be set, but the mobile phone still needs to be set), so that the other notebook driver is not the latest problem that may be unable to carry the problem that it cannot be carried out. At this time, updating the notebook wireless network card driver restart can basically solve the problem. If the CMD is still opened, enter the Netsh Wlan Show Drivers to see if it is behind the loading network: if yes OK, if no, it will not support the tragedy and it will not support it.

Leave a Comment

Shopping Cart