4 thoughts on “How to crack wooden products”

  1. 1. Apply anti -lacquer.
    2, the wax seal at both ends of the wood product and drying with the steam low temperature for a week can reduce the probability of cracking of wooden products.

    The maintenance of wood products:
    1, wipe it gently with dry cotton cloth every day, clean with wet wet cloth for a while, and finally apply a thin layer of thin layer Light wax.
    2, avoid direct sunlight, this maintenance method is not applicable to wood products, it is suitable for all furniture. Because the long -term sunshine is easy to cause the furniture water to be dried and cracking. Remember to pay attention to this detail when placing or installing furniture.
    3, avoid removal of stains with chemical solvents, wood products are prone to stains due to their special performance. If there are stains on the surface of the wooden products, do not rub it hard, or for convenience, pour chemical supplies directly, and remove it as soon as possible. But this not only scratched the light wax, but also damaged the furniture.
    4, avoid the environmental humidity, the room content in summer is easy to boom, especially the kitchen place. At this time, the wood products can be separated from the ground with thin glue.
    5, avoid being scratched by hard objects.
    6, stay away from the heat source, in the cold winter, especially the people in the north, will have heating experience. However, when the group is warm, try to keep the heating equipment away from the wood product 1 meter to prevent wood products from baking for a long time, so that the wood is cracking, deformation, and local deterioration of the paint film.

  2. You can use wood fissure agent.
    Matic fissure anti -anti -fissure product characteristics: It has a good protective effect on the surface of the wood, which can effectively prevent and reduce the contraction and expansion of the wood fiber -dimensional duct due to climate change. It can prevent and reduce the phenomenon of wood cracked and surface cracks caused by wood caused by wooden shrinkage. And humid areas caused by wood fiber tube expansion and cracks. It can also effectively reduce the end rupture and surface cracks, dry cracks caused by the rapid drying of humid wood materials. The applicable range is wide, the moisturizing effect is good, and it can adapt to various wet differential environments. It is particularly suitable for the mildew and insect -proof treatment of mildew and insect -proof and waterproof treatment stored.

  3. Yongbo 2.4 Crackproof Bao
    is generally used in parts that are easy to crack in home, hotels, hotels and other decorations.
    This decoration of all wood, wood and walls, wood and gypsum boards,
    The gap between the gypsum board and gypsum board
    Significant cracks and leakage effects
    can also increase adhesion between other objects (referring to solid).
    Stacked in houses, hotels, hotels and other parts of decoration.
    This products are blended adhesive gray, so it is convenient for
    The strong anti -cracking resistance, strong bonding and weather resistance
    moderate drying time, safe, environmentally friendly, reliable and reliable The resistance to yellow resistance is more superior.

Leave a Comment

Shopping Cart