4 thoughts on “How to install the excavator broken hammer”
Marion
The excavator finds it, the excavator driver recruits, and recommends the [special hunting driver] market! The hydraulic crushing hammer is a common equipment in construction machinery. Installing hydraulic crushing hammer seems complicated. In fact, it is very simple. Below is a few steps for the installation of hydraulic crushing hammer: n Toolboxes hydraulic crushing hammer High pressure hose
, Disassemble the sales of the axis on the bucket and put it on the side for later use. 2, use butter gun to inject the butter into the pillar holes of the hydraulic crushing hammer, put it with a rod, and nail into the market. 3, the front cover of the excavator small arm is placed between the hydraulic crushing hammer shell, install the sales axis, manipulate the excavator's small arm, lift the broken hammer, put down the small arm "beef bone", install another installation another Part of the sales set. 4. Use two high -pressure hose to connect the hydraulic oil pipe and the mid -cylinder body of the hydraulic crushing hammer on the forearm, tighten the bolt, and open the valve of the hydraulic oil pipe on the forearm. 5, the installation is complete, perform a test machine, check the overall situation of the operation, and adjust appropriately. If attention The excavator disassembly is risky. Please treat it with caution. You can view the instructions! The excavator disassembly and installation related accessories to avoid contaminated by residue, so as not to affect the quality of hydraulic oil. In the lower temperature, it is necessary to properly perform a test machine for the crushing hammer. In excavators to find work, excavator driver recruitment, recommend [special hunting driver] market! Professional construction machinery recruitment job search platform
In people's impression, excavators are widely used, can go up the mountains and rivers, can dig soil, and can remove buildings. As long as the excavator is used for special equipment, it is a new money -making tool, and the broken hammer is one of the most commonly used equipment for excavators. Broken hammer is also called artillery head, which is an indispensable tool in daily work, but as an excavator driver, do you really know how to use the broken hammer correctly? sharing the correct usage of the broken hammer. Correct use of broken hammer can effectively improve the efficiency of crushing work. If the operation is improper, the hammer will not be fully played, and it will damage the machine itself, guide the anti -hammer reaction force, damage the structural components such as the hammer body and the excavator arm. Is when the drill rod is in contact with the crushed object, the correct method can be used. First, confirm whether the direction of the drill rod is perpendicular to the surface of the compressed object. If the surface of the drill rod is tilted with the compressed object, the wear of the drill rod and the band will be accelerated. Is when confirming the direction of the drill rod, it is time to master the pressure of the drill rod. When the downward pressure of the drill rod is too high, due to the sudden break of the crushing object, the device may instantly tilt forward, which causes the broken hammer or fuselage to hit the ground violently, causing damage. When the downward pressure is too small, the broken hammer will hit the empty hammer. Therefore, when disconnect, the lower pressure of the drill rod should be determined, and the micro force of the body shall prevail. During use, knocking and knocking on the empty hammer is a taboo. To avoid this phenomenon, when the broken object is broken, we should stop the broken hammer. For a long time without target air attacks, it may cause unnecessary damage to the broken hammer.
During the broken process, the vibration generated by the broken hammer is quite large. In this process, it is likely to make the excavator's oil pipe and the loosening of each component screw, so we are making broken At the same time, the machine's condition should be observed. If the oil pipe is found to be loose, the operation should be stopped immediately, inspections and maintenance in time, and reduce unnecessary losses. It excavator broken operation seems simple, but there are many other doors. In addition to improving work efficiency, you must always pay attention to damage caused by crushing. Because I am a machine that loves the machine, I can't see some unnecessary people who damage my excavator. In the future, I will share some excavators in my spare time. Use knowledge and experience in the process. If you want to know other precautions when using the broken hammer, and the excavator driver recruiting job search information wx.51pj.cc, clear to the special hunting driver market
There are three types of switches, a pedal of a hydraulic oil pipe, and a wire control switch often used in Doushan. Finally, it is one of the operating rod on the hand. What do you want to break the broken hammer to install a hydraulic oil tube to the excavator first. The common triangular splint hammer, straight hammer, box mute hammer (just reduce some noise) is then a high -frequency broken hammer, and the hydraulic open stone cannon is rare. (Pure hand is requested to adopt, you can ask if you don’t understand.)
Since most hosts have reserved the oil port connecting of the container at the factory, when installing a broken hammer, you only need to connect the pipeline, connecting the pipeline, connecting the pipe and the broken hammer according to the requirements of the instruction manual. P correct operation can improve the operating efficiency of the broken hammer and extend the service life. There are the following points for operation precautions: each time of use, first check whether the high -voltage or low -pressure oil pipe of the broken hammer should be loosened; at the same time, be careful to check whether other places will be leaked at any time to avoid vibration due to vibration vibration. Causes the oil pipe to fall off and fail. During the crushing hammer, the rod should always be vertical with the surface of the crushed object. And make the rod tightly press the broken object, and the crushing hammer should be stopped immediately after crushing to prevent air. Continuous impacts that have no targets will cause damage to the crushing hammer and loosen the main bolt, which can hurt the host itself in severe cases. When the broken effect is performed, do not use it with shaking rods, otherwise the main bolt and the rod may be ruptured; Inspeal and damage the broken hammer or host. Mo crushing operations in water or muddy ground. Except for the rod, the other part of the broken hammer body should not be immersed in water or mud, otherwise the piston and other functional parts on it will be piled up due to accumulating mud. Causes the broken hammer premature losses. Is when the crushing objects are particularly hard, you should start from the edge. Do not knock for more than 1min in the same point to prevent the rod from burning or hydraulic oil. smake -do not use the broken hammer's guard as a tool to promote heavy objects. Because the excavation loader is mainly small machines, it is lightweight. The host hanging arm was broken, and the host rollover accident occurred. Mo operation when the hydraulic cylinder extensively or completely shrinks, otherwise it will cause the impact vibration to the hydraulic cylinder, which will be passed to the host. If the working conditions of the broken hammer are very harsh, correct maintenance can reduce the failure of the machine, extend the service life of the machine. In addition to the maintenance of the host in time, you should also pay attention to the following points: The appearance inspection. Check whether the bolts are loose; whether the sales axis is overly worn out; check whether the gap between the rod and the jersey is normal, and whether there is oil exudation in the meantime, indicating that the low pressure oil seal is damaged, and the professionals should be replaced. This lubrication. The lubrication point of the work device should be lubricated by the operation before and after each continuous operation of 2 to 3h. Coltage oil oil. The changes in hydraulic oil are different due to the different working environment. The simple way to judge the quality of oil is to observe the color of the oil. When the oil quality is extremely serious, the oil should be released and the cleaning should be cleaned. After the fuel tank and oil filter are injected into the new oil. The main body of the broken hammer is a set of precision components containing a hydraulic circulation system. Generally, do not decompose by factories without dedicated equipment.
The excavator finds it, the excavator driver recruits, and recommends the [special hunting driver] market!
The hydraulic crushing hammer is a common equipment in construction machinery. Installing hydraulic crushing hammer seems complicated. In fact, it is very simple. Below is a few steps for the installation of hydraulic crushing hammer:
n
Toolboxes
hydraulic crushing hammer
High pressure hose
, Disassemble the sales of the axis on the bucket and put it on the side for later use.
2, use butter gun to inject the butter into the pillar holes of the hydraulic crushing hammer, put it with a rod, and nail into the market.
3, the front cover of the excavator small arm is placed between the hydraulic crushing hammer shell, install the sales axis, manipulate the excavator's small arm, lift the broken hammer, put down the small arm "beef bone", install another installation another Part of the sales set.
4. Use two high -pressure hose to connect the hydraulic oil pipe and the mid -cylinder body of the hydraulic crushing hammer on the forearm, tighten the bolt, and open the valve of the hydraulic oil pipe on the forearm.
5, the installation is complete, perform a test machine, check the overall situation of the operation, and adjust appropriately.
If attention
The excavator disassembly is risky. Please treat it with caution. You can view the instructions!
The excavator disassembly and installation related accessories to avoid contaminated by residue, so as not to affect the quality of hydraulic oil.
In the lower temperature, it is necessary to properly perform a test machine for the crushing hammer.
In excavators to find work, excavator driver recruitment, recommend [special hunting driver] market! Professional construction machinery recruitment job search platform
In people's impression, excavators are widely used, can go up the mountains and rivers, can dig soil, and can remove buildings. As long as the excavator is used for special equipment, it is a new money -making tool, and the broken hammer is one of the most commonly used equipment for excavators. Broken hammer is also called artillery head, which is an indispensable tool in daily work, but as an excavator driver, do you really know how to use the broken hammer correctly?
sharing the correct usage of the broken hammer. Correct use of broken hammer can effectively improve the efficiency of crushing work. If the operation is improper, the hammer will not be fully played, and it will damage the machine itself, guide the anti -hammer reaction force, damage the structural components such as the hammer body and the excavator arm.
Is when the drill rod is in contact with the crushed object, the correct method can be used. First, confirm whether the direction of the drill rod is perpendicular to the surface of the compressed object. If the surface of the drill rod is tilted with the compressed object, the wear of the drill rod and the band will be accelerated.
Is when confirming the direction of the drill rod, it is time to master the pressure of the drill rod. When the downward pressure of the drill rod is too high, due to the sudden break of the crushing object, the device may instantly tilt forward, which causes the broken hammer or fuselage to hit the ground violently, causing damage. When the downward pressure is too small, the broken hammer will hit the empty hammer. Therefore, when disconnect, the lower pressure of the drill rod should be determined, and the micro force of the body shall prevail.
During use, knocking and knocking on the empty hammer is a taboo. To avoid this phenomenon, when the broken object is broken, we should stop the broken hammer. For a long time without target air attacks, it may cause unnecessary damage to the broken hammer.
During the broken process, the vibration generated by the broken hammer is quite large. In this process, it is likely to make the excavator's oil pipe and the loosening of each component screw, so we are making broken At the same time, the machine's condition should be observed. If the oil pipe is found to be loose, the operation should be stopped immediately, inspections and maintenance in time, and reduce unnecessary losses.
It excavator broken operation seems simple, but there are many other doors. In addition to improving work efficiency, you must always pay attention to damage caused by crushing. Because I am a machine that loves the machine, I can't see some unnecessary people who damage my excavator. In the future, I will share some excavators in my spare time. Use knowledge and experience in the process. If you want to know other precautions when using the broken hammer, and the excavator driver recruiting job search information wx.51pj.cc, clear to the special hunting driver market
There are three types of switches, a pedal of a hydraulic oil pipe, and a wire control switch often used in Doushan. Finally, it is one of the operating rod on the hand. What do you want to break the broken hammer to install a hydraulic oil tube to the excavator first. The common triangular splint hammer, straight hammer, box mute hammer (just reduce some noise) is then a high -frequency broken hammer, and the hydraulic open stone cannon is rare. (Pure hand is requested to adopt, you can ask if you don’t understand.)
Since most hosts have reserved the oil port connecting of the container at the factory, when installing a broken hammer, you only need to connect the pipeline, connecting the pipeline, connecting the pipe and the broken hammer according to the requirements of the instruction manual.
P correct operation can improve the operating efficiency of the broken hammer and extend the service life. There are the following points for operation precautions:
each time of use, first check whether the high -voltage or low -pressure oil pipe of the broken hammer should be loosened; at the same time, be careful to check whether other places will be leaked at any time to avoid vibration due to vibration vibration. Causes the oil pipe to fall off and fail.
During the crushing hammer, the rod should always be vertical with the surface of the crushed object. And make the rod tightly press the broken object, and the crushing hammer should be stopped immediately after crushing to prevent air. Continuous impacts that have no targets will cause damage to the crushing hammer and loosen the main bolt, which can hurt the host itself in severe cases.
When the broken effect is performed, do not use it with shaking rods, otherwise the main bolt and the rod may be ruptured; Inspeal and damage the broken hammer or host.
Mo crushing operations in water or muddy ground. Except for the rod, the other part of the broken hammer body should not be immersed in water or mud, otherwise the piston and other functional parts on it will be piled up due to accumulating mud. Causes the broken hammer premature losses.
Is when the crushing objects are particularly hard, you should start from the edge. Do not knock for more than 1min in the same point to prevent the rod from burning or hydraulic oil.
smake -do not use the broken hammer's guard as a tool to promote heavy objects. Because the excavation loader is mainly small machines, it is lightweight. The host hanging arm was broken, and the host rollover accident occurred.
Mo operation when the hydraulic cylinder extensively or completely shrinks, otherwise it will cause the impact vibration to the hydraulic cylinder, which will be passed to the host.
If the working conditions of the broken hammer are very harsh, correct maintenance can reduce the failure of the machine, extend the service life of the machine. In addition to the maintenance of the host in time, you should also pay attention to the following points:
The appearance inspection. Check whether the bolts are loose; whether the sales axis is overly worn out; check whether the gap between the rod and the jersey is normal, and whether there is oil exudation in the meantime, indicating that the low pressure oil seal is damaged, and the professionals should be replaced.
This lubrication. The lubrication point of the work device should be lubricated by the operation before and after each continuous operation of 2 to 3h.
Coltage oil oil. The changes in hydraulic oil are different due to the different working environment. The simple way to judge the quality of oil is to observe the color of the oil. When the oil quality is extremely serious, the oil should be released and the cleaning should be cleaned. After the fuel tank and oil filter are injected into the new oil.
The main body of the broken hammer is a set of precision components containing a hydraulic circulation system. Generally, do not decompose by factories without dedicated equipment.